Gas Processor - 3D Printable Replication
As of 5-18-23, STLs are being printed to test assembly. At this time, until this banner is removed, please do not attempt printing. Verification is needed before others waste time and resources for parts that don't go together. Thank you.
RETAINING CAP:
(100% Fill: 65G) , (50% Fill: 45G)
UPPER INTAKE:
(100% Fill: 29G) , (50% Fill: 23G)
BOTTOM PIECE OF UPPER INTAKE:
(100% Fill: 2G) , (50% Fill: 2G)
Bottom Piece To Upper Intake.stl
TOP O-RING
(100% Fill: 44G) , (50% Fill: 29G)
LED BODY:
(100% Fill: 206G) , (50% Fill: 120G)
OPTICAL LENS:
(100% Fill: 58G) , (50% Fill: 37G)
OUTER ELECTRODE DIMENSIONS:
OUTER ELECTRODE LED GROOVE STENCIL:
(100% Fill: 6G) , (50% Fill: 6G)
INNER ELECTRODE DIMENSIONS:
BOTTOM O-RING & BLOCK PLATE:
(100% Fill: 68G) , (50% Fill: 43G
Bottom O-Ring & Block Plate.stl
BOTTOM BLOCK:
(100% Fill: 265G) , (50% Fill: 152G)
LED COVER:
(100% Fill: 90G) , (50% Fill: 71G)
TOTAL ASSEMBLY:
